Programming a remote is something you most likely would do after purchasing a new Philips television or remote control. Each remote control comes with codes that can be used to program the remote, and losing the codes can be frustrating. However, you can still program a Philips remote control even if you have misplaced the codes.
Original Philips Universal Remote Control CL035A. The Philips CL035A Universal Remote Control is in great condition; The remote you receive will be the one pictured unless part of a multiple quantity listing All of our remotes are cleaned, sterilized and every function tested. How To Program A Philips Universal Remote. Hold down the “Code Search” button on the remote control. Release the button after the red indicator light blinks. Press the device button, such as “TV” “CLB” “VCR” or “SAT” This will make the indicator light blink off and then back on. Keep pressing the “CHAN +” button until the device changes channels. When the TV changes channels again, stop.
Step 1
Turn on your TV (or other device). You will have to do this manually until you program your Philips remote control.
Step 2
Look for the “Setup” or “Code Search” button on the Philips remote control. Which button your remote has will depend on the exact Philips remote control you are using. This button may be a different color or may be labeled.
Step 3
Hold either the “Setup” or “Code Search” button for about 10 seconds. If your remote has a light, the light should begin blinking. If there is no light, you can just count to 10 and then let go of the button.
Step 4
Press the “TV” button on the remote to program the Philips remote to your television set.
Find and press either the “Up” or “Down” channel button on the remote. Continue pressing either button until the television channel changes. This may take several minutes. Once the channel changes, press the “Power” button on the remote to turn off the TV. Your Philips remote will now be programmed to your television.
Tip
- You can also find user manuals for Philips remote controls online by going to the link in the Resources section. The user manual will contain the programming codes for your particular remote control.
- remote control image by Hao Wang from Fotolia.com
More Articles
programming the remote:
- Turn on the device you are programming the remote for (TV, VCR, etc).
- Press and release the ‘Function Key’ (TV, CABLE, VCR or AUX).
- Press and hold the ‘Setup’ until the function key blinks twice.
- Enter the 4-digit code for the desired device.
- Aim the remote control at the device and press Power once. The device should turn off.
NOTE: If it does not respond, repeat steps 1-5. If it still does not work, try Searching for the Code.
code search:
- Turn on the device you are programming the remote for (TV, VCR, etc).
- Press and release the ‘Function Key’ (TV, CABLE, VCR or AUX).
- Press and hold the ‘Setup’ until the function key blinks twice.
- Enter 9 – 9 – 1.
- Repeatedly press POWER and the Function Key until the device turns off (you may need to do this a number of times).
- When the device turns off, press ‘Setup’ to lock in the code.
changing volume lock:
By default, volume is controlled through your cable box; but if you have a TV that permits volume control, and you would to control volume through it, follow these steps (this procedure does not affect the device codes you set previously).
To control the volume through the TV while in Cable mode:
- Press and release the ‘TV’ key.
- Press and hold the ‘Setup’ until the TV key blinks twice.
- Enter 9 – 9 – 3.
- Press VOL +. You now control the volume through the TV whenever you change the volume level in Cable mode.
equipment guide
CLICK HERE for User Guide